Visited product

BeeRotor Z1407/4100KV ZoeFPV Special Edition Motor

BeeRotor Z1407/4100KV ZoeFPV Special Edition Motor

Price: $12.99

Item: Z1407/4100KV

Weight: 80g

Quantity : 
app hook
BeeRotor has joined forces with Zoe Stumbaugh (ZoeFPV), one of the most influential and talented female FPV freestyle pilots today, to bring you the perfect FPV freestyle motor. This Z1407 4100Kv motor has been engineered from the ground up for freestyle, and it is the perfect blend of elegant design and high end performance. By using high quality Steel & Hollow shaft, and CNC precision machined parts, ZoeFPV motor provides silky smooth, reliable power. The bell housing design provides excellent cooling effect as well as strength while remaining light weight. The Kv and size of the motor has been carefully selected to be optimized for 3" props on a 4s battery. This combination gives you an excellent burst of power to quickly elevate your aircraft above and around objects.
The Z1407 4100Kv motors have a strong steel 2mm internal shaft and 5mm external non-rotation specific prop shaft. The prop shaft supports 5mm shaft props with no adapter need, saving you weight. Each motor comes with two ultra-lightweight, black anodized, low profile, flanged aluminum lock, ensuring your propellers do not come loose during flight.Each motor comes with YFS 4x M2x4(for 2mm bottom plate) and YFS 4x M2x5(for 3mm bottom plate) screws for mounting on most airframes. The motor wire length is 110mm for easy installation.  You can also simply cut the motor wires to the desired length and directly solder them to your ESC. With the motor wires cut to a short length (and no bullets) the motor only weighs an incredible 16g! 

1. The Special magnet for ZoeFPV Motor.
2. The bearing is NMB(Japan) , smooth and a long life.
3. 0.20mm laminations, maximum efficiency and minimum Eddy Current losses.
4. Ultra-flexible motor leads with high-temp 220 °silicone rubber.
5. Power Optimization
6. With rotor dynamic balance process.

Stator Diameter: 14 mm
Stator Thickness: 7 mm
Number of Stator Slots: 9
Number of Magnet Poles: 12
Motor Kv Value: 4100 RPM
No Load Current (Io)  1.0 Amps @ 10 Volts: 1.0 Amps
Motor Resistance (Rm) per Phase: 0.16 Ohms
Motor Resistance (Rm) Phase to Phase: 0.12 Ohms
Maximum Continuous Current: 20 Amps
Max Continuous Power (3-cell Li-Po): 220 Watts
Max Continuous Power (4-cell Li-Po): 300 Watts
Motor Weight: 17 g
Outside Diameter: 18.3 mm
Motor Shaft Diameter: 3 mm
Prop Shaft Diameter: 5 mm
Overall Shaft Length: 32 mm
Motor Body Length: 18 mm
Motor Timing: 5-10 degrees
PWM Frequency: 8-20 KHz

1 Z1407/4100KV motors
2 flanged aluminum lock nut
4pcs M2x4mm YFS screw
4pcs M2x5mm YFS screw

chs2bag34 : 17-04-14 05:14
What esc would be best if running 3s and 4s?
Admin  Reply: 17-04-16 10:34
I used BS20A on it.
naysambo : 16-10-05 16:56
With Tri Blade Prop 3.5x4.5" 4s 14.8v Battery. Will it get hot after 6mn flight?
Admin  Reply: 16-10-10 07:28
It is ok!

Ask a question

Contact: (Can be phone, email, qq, etc.)
If you have any comments on the product or experience, please share!

Write a Review

Contact: (Can be phone, email, qq, etc.).
Powered by ShopEx v4.8.5 |Gzip disabled