Rctimer E320 Multirotor Tuned Propulsion System 1-2.5kg
The E320 Motor Package a fine-tuned propulsion system specifically engineered for multi-rotor copters weighing 1-2.5kg.Features
Rctimer Carbon Fiber 9.4*4.3 ” Self-locking Prop
Representing the state of the art in this industry, the 9.4*4.3“ rotor offers an approx. 20% ~ 25% improvement over the 8.0*4.5” rotor without the need of using a heavier motor, making the 350 ~ 500 model quad copter achieve a significantly higher lift and thus more powerful to carry a camera and gimbal setup (FPV). The rotors are carefully balanced dynamically, you will never be bothered by jello effect from your airborne rolling shutter camera. The low inertial design enables your flight controller to use a much higher gain value to achieve a higher stability and maneuverability all at once.
1. The magnet specification is 42 uh.
2. The bearing is NMB(Japan) , it can support a long life.
3. 0.20mm laminations, maximum efficiency and minimum Eddy Current losses.
4. Ultra-flexible motor leads with high-temp 220 °silicone rubber.
5. 2.0mm bullet connectors already installed.
6. With rotor dynamic balance process.7. The prop adapters in CW/CWW rotation
NFS30A (OPTO ESC)
RCtimer NFS series ESC are all N-FETs and Finally a 16MHz Crystal,SimonK firmware, they are professional for Multi-Rotor, we have release NFS ESC now and put the lowest price on it, enjoy your flying now!
Conclusion NFS30A is a ny nice ESC, works very well, has all NFETS and FINALLY a 16 MHz Crystal so no temperature drift of ESC calibartion.
- Material: Carbon fiber
- DJI Phantom Version 2 compatible
- Built-in self-locking nut, manual installation
- Higher tension, easy to install
- Includes CW/CCW propeller 4pairs
- Length: 9.4inch
- Pitch: 4.3inch
Shaft Diameter: 3mm
Weight (g): 54g
ldle current(10)@10v(A): 0.7A
No.of Cells(Lipo): 3-4S
Max Continuous current(A)180S: 30A
Max Continuous Power(W)180S: 450W
Max. efficiency current: (4-12A)>85%
internal resistance: 0.11Ω
Input voltage:DC 6-16.8V(2-4S Lixx)
Running current:30A(Output: Continuous 30A, Burst 40A up to 10 Secs.)
Size: 36mm (L) * 26mm (W) * 7mm (H).
2 sets CW MT2610 MOTOR(screw type M3*6)
2 sets CCW MT2610 MOTOR(screw type M3*6)
4 pcs NFS30A ESC
2 pairs Carbon Fiber 9.4x4.3" Self-locking prop
12 pcs 3.5mm female connector
1 pcs 150mm Φ4.0 Heat Shrink Tube