Visited product

BeeRotor F3 (AIO) Flight Controller with OSD

BeeRotor F3 (AIO) Flight Controller with OSD

Price: $29.99

Item: BRF3

Weight: 100g

Quantity : 
app hook


Optimization for Cleanflight/Betaflight firmware - (flash as spracing target)

ARM Cortex-M4 core STM32F303CC with 32bit/72MHz/256K Flash/40K SRAM and hardware floating point unit

MPU6050 and BMP180 / BMP280 Sensors

Build-in 8MB flash for black box log recorder

On board OSD with absolutely original MAX7456EUI+ and standard FTDI debug port

Receiver connector with PPM/SBUS/SumD/DSM2/DSMX and RSSI input

Up to 3 serial ports and 8 PWM outputs

Multifunction connectors with SWD/UART2~3/Soft-serial/Buzzer/LED trip/Voltage detection

Multifunction OSD connectors with video_IN/ video_OUT/ICSP/debug port (UART1)

PDB connector with 5V input/Current and Voltage detection

Power input reverse polarity protection


Power input: 5.0~5.5V

Dimension: 35x35x9mm

Fixing hole spacing: 30mm

Weight: 7.3g

PPM/RSSI/SBUS/SumD Receiver Cable

Camera/video-TX cable

Buzzer/LED strip/voltage detect cable

OSD debug port to FTDI adapter cable

If your Drones doesn't PDB, you can use BR-PDB, it is the best solution for BRF3:

If BR-PDB work with BRF3, you need reset the Voltage scale to "210":

Default OSD:

(OSD File:


pladel19 : 16-08-31 14:27
How can i use the osd file (OSD File: Thank you in advance!
Admin  Reply: 16-08-31 15:53
You need connect MWOSD GUI.
Q : 16-06-23 06:05
I can´t flash betaflight. Tried all ways. connecting to bootloader faild, why? SPRACINGF3.hex
Admin  Reply: 16-07-05 08:51
Please check in here :

Ask a question

Contact: (Can be phone, email, qq, etc.)
If you have any comments on the product or experience, please share!

Write a Review

Contact: (Can be phone, email, qq, etc.).
Powered by ShopEx v4.8.5 |Gzip disabled